Other features
In this section additional system features are described.
Interactive map
The interactive map is designed to display the installed equipment to the user. The user can change the map scale by scrolling with the mouse wheel and the “+” and “-” buttons on the keyboard or in the interface. Equipment icons are displayed to the user on the map.
Selecting detectors on the map
You can select detectors by left-clicking on a detector marker on the map. In this case, the detector marker changes to a similar icon with a white circle in the center.
When selecting a detector and going to a detailed report in the field Selecting a detector for a report the name of the selected detector will already be added. When selecting multiple detectors and going to a consolidated report, in the report field Selecting detectors for the report the selected detectors will already be added.
View detector information on an interactive map
The interactive map displays groups of detectors in the form of a table with the names of all detectors located at a given point on the map and their operating statuses. When the scale of the interactive map is reduced, detectors located close to each other are combined into a group. The group will be depicted on the map as a pie chart, showing the number of detectors within the circle. When you hover the cursor over a group of combined detectors, a pop-up list should appear containing a list of detectors, as well as their status in the form of corresponding icons. The operating statuses of the combined detectors are displayed in the different colors by the border of the pie chart. When you hover your cursor and click on one of the combined sensors, a pop-up list appears. Besides if you hover over an item, brief information about the selected detector will appear. Clicking on it will open the detector settings page.
You must select the detector name in the list and hover your mouse over it to view the information related to the selected detector. The number of detectors in this group is displayed inside the detector group marker.
When zooming into a detector in detail on the interactive map, you must hover your mouse over the detector marker to view information about the detector. This will display a pop-up window with information about the detector.
| Parameter | Description |
|---|---|
| Detector name | The name of the detector assigned to it in the System |
| Detector ID | Unique detector identifier |
| Detector IP address sds | Unique address identifying the detector |
| Date | Detector creation date |
From 0 km/ To 0 km 🏍️
| Parameter | Description |
|---|---|
| Traffic intensity | The number of vehicles passing through the cross-section of a highway per unit of time (per day or one hour). |
| Average driving speed | The arithmetic mean of the speeds of vehicles traveling in one direction along a section of road |
| Traffic density | Number of vehicles per 1 km of road |